Kelvinator Ro water purifiers customer support

Quanta Water purifiers - Product Specifications

Flow Rate 10 litres per hour
Permeate 20%
TDS Reduction 90% minimum
Membrane Capacity 75 GPD
Storage Tank Capacity 7.5 litres
Net Weight 9.6 Kgs
Dimension (Inches) 13" Length x 8.3" Breadth x 16.2" Height
Power Rating 36 watts
Input Voltage 170 – 300V AC / 50 Hz – Single phase
Feed Water Pressure 0.6 ( min) – 2.0 (max) kg / sq.cm
Feed Water Temperature 5° - 45° C
Installation Mode Dual ( Counter Top/Wall Mount)
Maximum Daily usage 5 hours
MMoC for Plastic parts Food Grade PP,PC /ABS


Feed water characteristics

pH Value 7.0 – 8.0
Total Dissolved Solids 500 ppm – 2500 ppm
Suspended solids < 5 ppm
Turbidity <10 NTU
Total Hardness < 500 ppm
Iron / Manganese < 0.3 ppm
Free Chlorine Nil
Silica < 20 ppm
Heavy Metals < 0.5 ppm
Oli and Grease Nil

 

KELVINATOR QUANTA+
This model is specially designed for water with a TDS range of 200 – 500ppm. KELVINATOR QUANTA+ has a high permeate ratio of close to 40% and TDS reduction of 70%

Notes

  • Specifications are subjected to change without prior notice
  • If the inlet water is lower than the minimum specified, a booster pump is recommended. If the inlet water pressure is higher than the maximum specified, a pressure reducing valve is recommended. Both can be procured from the open market.

KEY PERFORMANCE RATIOS

Model Permeate TDS Reduction
Kelvinator Quanta+ 20% 90%

 

Notes

  • Flow rates depend on variable factors such as feed water pressure, feed water characteristics and condition of the membranes and filters.
  • Permeate and TDS reduction percentages also depend on variable factors such as feed water pressure, feed water characteristics and condition of the membranes and filters.
  • Permeate and TDS reduction percentages are approximate in nature and are primarily determined by the exact feed water quality.
  • Specifications are subject to change without prior notice.
Caution on Online Resellers